
Find the perfect tool for the job at Scarlett Inc. Our used machines will always work as hard as you do.
- All
- 3D
- Aluminum Cutting
- CNC Machining Center
- CNC Router
- Dust Collectors
- Edgebanders

C.R.Onsrud 145M12A (NEW)
The M Series may be the smallest moving gantry CNC router in the C.R. Onsrud line-up, but don’t be fooled into thinking it’s any less of a workhorse than bigger machines in our product line. C.R. Onsrud incorporates the same detailed engineering, workmanship and quality of materials into every machine we manufacture – no matter…

2007 C.R. ONSRUD MODEL 146C18CD “Super Duty” CNC ROUTER – 5’ x 12’ Table
18HP Main Router Spindle 24,000RPM Twin Tables or Locked for a Single 5’ x 12’ HSK63 Spindle Taper 9 Spindle Boring Block 12 Position Automatic Tool Changer OSAI Controller 40HP Dekker Vacuum Pump 14” Z Axis C-Axis Ability for Aggregates Pods Collets Included Tool Holders Included Voltage 440/3PH Year: 2007 Machine NEW was $251,000.00 2007 C.R. ONSRUD MODEL 146C18CD “Super…

Holzher Genesis 1402 HF
Technical Specifications: 32″ diameter disc for coil feed adjustable bar for strip feed 3/8″ edgebanding thickness capacity glue cartridge system (no glue pot) two-roll pressure section two high-frequency end trim motors two high-frequency tilting flush trim motors two buffing motors one complete set of tooling outboard support panel one case of Jowat glue cartridges

NEW ATECH ZIGMA-06 FA HEAVY DUTY 22″ (550 MM) CNC DOUBLE HEAD MITER SAW
Zigma-06 FA is a heavy-duty full automatic double-head CNC miter saw equipped with 22″ (550 mm) carbide-tipped saw blade, and designed for straight and miter cut of aluminum, vinyl profiles and wood. GENERAL FEATURES 2 x 3,0 kW Motor 15” PC touch screen With its servo motor the head angles and head movements can be…

2016 Holzher Sprint 1329
A very well kept machine in Good condition. The 1329 is the fully servo-controlled machine you’ve been looking for. 2016 Holzher 1329 Edgebander Machine Layout Pre-Milling Station (2) 2.0 KW (2.68 HP) – 12,000 RPM motors; Equipped with “ProLock” quick-change flange including height adjustment for optimum utilization of cutters. Edge Feeder Magazine “SYNCRO” drive. The…

Circle T Manufacturing Easy Coping Machine C220
Application Specifications: ● EASY Quick-Change Spindles INCLUDED ● EASY Foot Pedal Cycle Start ● EASY Pneumatic Hold Down Clamp System ● 16” Wide Cutting Capacity ● 5/8” to 1” Material Thickness Utility Requirements: ● Dust Collection Requirements: 2 – 4" Outlets, 670 CFM (each) ● Pneumatic Requirements: .3 CFM @ 100 PSI to Power Table…

Cantek SR-750 Pneumatic Overarm Pin Router
There is nothing like an Overarm Router for production woodworking. The Cantek SR-750 Pneumatic Overarm Pin Router is the ideal solution for high volume routing and profiling of repetitive shapes. ● Solid welded steel frame construction with a cast iron tilting table. ● 7.5 HP motor (13 Full load amps) ● 460 Volt 3 phase…

C.R Onsrud 193G24W10 CNC Machining Center
Make: C.R. Onsrud Model: 193G24W10 G-SERIES Year: 2020 Don’t be fooled by other websites with this same machine claiming this machine is at their location, this machine is actually at our facility in Grand Rapids, MI. Brand New 0 Hours on this machine. *Safety Features not shown in pictures (bump bars, etc.) SPECIFICATIONS: Working Table…

RITTER R2063 6° LOW ANGLE POCKET CUTTER
This is a new machine located at Scarlett Headquarters. Standard Features: ● 6° Low angle ● PLC controlled cycle ● Foot pedal operated ● Adjustable Material Stops ● Up to 2′′ thick material ● Cycle Time: 1.75 – 2 Sec ● Tooling Included Technical Data and Specifications: ● Dust Port: 4′′Router Bit: 3/8” Solid Carbide,…

Atech 22” (550 mm) Double Head Automatic Miter Saw
Specifications: ATECH ZIGMA-02 AP/550 is a full automatic (CNC) heavy duty Ø 22” (550 mm) double head miter saw, which has been designed for straight or miter cuts of vinyl (PVC) and aluminum extrusions. • Two-hand safety operation • Equipped with CNC control system for precise angle adjustment • Tilting range inwards 45° and outwards…

Atech 22” (550mm)Heavy Duty Automatic Upcut Miter Saw
Specifications: ● Heavy duty upcut miter saw designed for straight and miter cuts of PVC (vinyl), aluminum extrusions and wood. ● High quality carbide tipped 550 mm (22”) saw blade (standard) ● Twin vertical pneumatic clamps (standard) ● Fixed angle adjustments at 0-15°- 22, 5°- 30°- 45°- 60°-75° angle pin locks ● Air Gun, User’s…

Atech 18” (450mm) Heavy Duty Automatic Upcut Miter Saw
Heavy duty upcut miter saw designed for straight and miter cuts of Aluminum billet, aluminum extrusions, plastic, and wood.

Nederman S1000
Description 10 HP material handling fan 400 mm (15-3/4″) diameter inlet (24) 220 mm (8.66″) diameter x 1960 mm (77.1″) tall cloth filter bags that give 360 square feet filter media Rated at 5,000 CFM (3) 24 gallon plastic collection bags approx. 19″ dia. X 51″ tall Overall assembled dimensions: 8’9″ x 4’2″ x 10’10”…

2020 C.R. Onsrud 146C12 5 Axis
NEW C.R ONSRUD MODEL F146C12 “Super Duty Series” CNC ROUTER Designed, engineered, & manufactured in the USA, utilizing Finite Element Analysis Fabricated base consisting of heavy steel construction, bridge, and vertical supports All structural components are stress relieved utilizing thermal heat treatment. Fixed bridge design with twin moving tables allows for up to 3100 IPM…

3D Systems ProJet MJP 2500 Plus
Work envelope:11.6″x8.3″x5.6″ Resolution xyz:800x900x790 DPI 32u Layers Print speed:1 Lane .26 in/hr 2 Lane .19 in/hr 3 Lane .12 in/hr Software:3D Sprint Post processing:MJP EasyClean System Build materials supported:VisiJet M2 EBK, ENT, RBK, RCL, RWT, M2g CL, DUR, M2R BK, CL, GRY, TN, WT Connectivity:Network Ready with 10/100/1000 Base Ethernet Interface USB Port Data files…