Used Slip Con DiscMaster Model DDBB-1350 Four Head Finish Sanding Machine; having a width capacity of 52″ with minimum thickness of workpiece of 3mm and maximum thickness of 100mm; equipped with rotating disc stations on the first and second heads with 1.5 kW motors at 30 to 300 R.P.M., with a 0.37 kW oscillation motor operating at 40 R.P.M., 100mm; with two brush sanders on the third and fourth heads with 2.2 kW motors operating on 30 to 300 R.P.M. with a diameter of the rolls at 12 inches/15.7 inches; with automatic, pneumatically-controlled centering of the feed belt; with a separate variable speed feed motor delivering feed rates from 3 to 15m/min; with motorized height adjustment of the sanding unit; easy pull-out of disc station on left and right for easy pad changing; height adjustment of disc station against sanding rollers; blowing device for cleaning workpiece; antistatic brush; interface control to connect to finish line; separate variable speed adjustment for two piece sanding roller; electronic digital display for showing height of workpiece; with spring loaded hold down rollers; with a vacuum table complete with vacuum pump; with four dust collection outlets of 140mm; with emergency off switches including a safety device for panel over-thickness; with electrical controls wired for AC 3/60/460 volt operation. Serial Number: 10490. (New 2004). Copy and Paste to View Video of Machine:

Machine Stock Number: SK0200000084
Member Stock Number: 7208LC
Condition: ATFS

James Scarlett

Contact James Scarlett