|
Super Special Savings
|
.jpg)
|
The Cantek TA12/14 tilting table saw is the 14” version equipped with a 10 HP belt driven motor at 4500 RPM and with a depth of cut of 5” in the 90 degree position and 3.5” in the 45 degree position. The saw features a ground and polished 48” by 38” table top with “T” slot/mitre gauge and rip fence. The rugged single point fence system can rip 49” from the blade and adjustments to blade height and angle of cut are made from large handwheels convenient to the operator.
|
|
|
|
|
|
|
|
|
Raimann ProfiRip KM310 2M Optimizing ripsaw with Valuerip III Infeed
Condition: Good
Price $124,900.00
|
.jpg)
2005 Raimann ProfiRip KM310 2M Optimizing ripsaw with Quickfix and 2 moveable blades. 50 HP 65mm arbor, wired 440 volt 3 phase. 11.8" blade dia. with 80mm blade bore. 1 HP feed, infinitely variable up to 115 FPM. 10" dia. dust hood, 3200 cfm. 1" - 12 1/4" cut width; 25 1/2" throat opening; 7/8" min. strip width; min. material length 15 3/4". Max. cut height with pressure board 2.5", without pressure board 3". With ValueRip III Optimizing Infeed System. 15 ft. infeed with movable servo fence. Call 800-678-3505 for more information.
|
Recent Projects and Demonstrations
Below is a link to our you tube channel which you can interact with on this site.
|
Please click on the Bag below to take our survey and recieve a free Scarlett Bag
.jpg)
You're Invited!
June 2nd
"Thrive, Not Survive"
Click on the Planit logo for more info
|
.gif)
.jpg)