HOLZ-HER LYNX 7511CNC Router Used- VERY LOW HOURS
The HOLZ-HER LYNX 7511 represents the most advanced CNC technology and the best service and support programs in the woodworking industry.
The LYNX 7511 is a heavy-duty machining center that is capable of handling the toughest routing and shaping requirements as well as the fast and precise drilling requirements of the most demanding wood shops. This is due to the basic design which incorporates a heavy-duty frame construction with the proven solid arm stationary “Y” axis support arm design.
Both the machine base and support arm are manufactured from heavy gauge steel, normalized after welding. The normalizing process will relieve any stress in the metal prior to further machining operations ensuring very accurate drilling for guideway placement. This design also requires much less floor space behind the machine in comparison to other designs.
The heavy-duty frame and the rigid arm design provide for vibration free machining as well as for full support of the head movement throughout the entire machining cycle. This is most important at the outermost points of the machining cycle. When the machining center is machining at the front of the work envelope the rigid arm design provides full support of the working units while also minimizing the unsupported overhung load.
STANDARD ITEMS INCLUDED WITH BASE MACHINE
Solid welded machine frame with ground prismatic guide system
Rack & pinion drive in X-axis, ball screw drive system in Y- and Z-axis
1 push buttons for clamping and releasing of work pieces
4 Pneumatic Pup-Up Pins for panel positioning
10 vertical boring spindles individually selectable, 6,800 RPM
6 in X- and 4 in Y-axis, with dedicated 2.28 HP motor
15 HP Air Cooled Router Head (11 Kw) 1,000-18,000 RPM HSK-63F
12-Position Linear Tool Changer mounted at right end of the machine frame
Vacuum pump (2) 250 m³/h
Manual lubrication for all linear guides in X, Y, and Z
Transformer for 230V/60
Heat Exchanger for electrical cabinet
HSK F63 Tool Holders (6 each)
( 6 ) 1/2 Inch collets for tool holders
Drill Bit Adapters (10 mm) – Left (5 each)
Drill Bit Adapters (10 mm) – Right (5 each)
Handheld control unit
VERY LOW HOURS…