Midwest Tool Expo & Auction is going to be organized at Michiana Event Center (MEC), Howe, USA from 26 Jan 2018 to 27 Jan 2018. This expo is going to be a 2-day event. This event forays into categories like Industrial Engineering, Tools & Equipment.
2018 Expo: Friday, Jan. 26th 10:00 am – 6:00 pm
Saturday, Jan. 27th 8:00 am – 2 pm
Auction Starts Saturday 9am Multiple Rings
* Watch for our door prize giveaways *
Specializing in Woodworking, Carpentry & Construction
Exhibitor Information call Ervin Miller at260-768-3033
Auction Information call Robert Mishler260-336-9750
The Van Buren Hotel
1175 North Van Buren (S.R. 5)
Shipshewana, Indiana 46565
Ph: (260) 768-7780
www.thevanburenhotel.com
Holiday Inn Express
0045 W 750 N
Howe, Indiana 46746
Ph: (260) 562-3660
www.hiexpress.com
Howe Super 8
7333 North State Rd 9
Howe, Indiana 46746
Ph: (260) 562-2828
www.super8howe.com
Hampton Inn
71451 South Centerville Road
Ph: (269) 651-4210
www.sturgis.hamptoninn.com
Used C.R. Onsrud Model 98C20HS CNC Router
Used C.R. Onsrud Model 98C20HS CNC Router
C.R. ONSRUD MODEL 98C20HS “Super Duty Series” CNC ROUTER 2003
(60″X96” axis travel) – with: Oversized Extra Thick Cast-Iron Fixed Bridge & Oversized Extra Thick Cast Iron
Vertical Supports, Thermal Heat Treated, Stress Relieved, & Normalized One-Piece, Steel Frame Base; Fixed Bridge, Twin Moving Table Design with 3000″ per minute machining speed, full 3-D capability, 14 inches under bridge clearance & 11 inches of Z axis stroke, precision ball-screw drives for ALL axes, precision linear guide ways, centralized lubrication system, OSAI Series 10/510i controller, 20HP – 24,000 RPM fully programmable, liquid cooled variable speed, quick-change spindle, capable of routing & drilling, programmable feed rates with override capability, 12 TOOL – AUTOMATIC TOOL CHANGER. TWIN ALUMINUM TABLES function as an independent 60” x 48″ table and 60” x 48″ table. Each table has low vacuum sensing safety shut-off with override capability. Twin Tables can also operate in tandem as a single 60″ x 96″ table, with full table coverage. Includes all switches, valves, gauges, safety interlocks, & Vacuum Plumbing necessary for either suck-through or dedicated spoil boards, and is easily modified for the use of pod systems. All tables include pressure sensitive safety-stop / emergency-stop bars along the front & rear, & machine is surrounded by a 360 degree emergency-stop cable.
This CNC Router package included the following items:
– 5’ x 8’ table with 5’ x 4’ & 5’ x 4’ split for pendulum processing
- OSAI PC Front Series 10/510i System – OSAI PC Front w/High Res touch screen, network capability, PLC Machine Controller, plus adds OSAI Digital Drives, Amps, and Servos
– Windows 7 Operating system upgrade
– 20 HP Spindle Liquid cooled w/HSK-63F Spindle Taper – Columbo Spindle
– 12 Tool – Dynamic Automatic Rotary Tool Changer – Fully Servo controlled
– Automatic Aggregate Tool Changer & Aggregate Capability – makes machine aggregate capable – No C-axis, so you can’t rotate the aggravation tool, but it can be used in a fixed position.
– Onsrud / NEMI High-Precision Vacuum Grid Table – Vac pump not included
– Replacement cost for a new machine is $155k
This is where the machine is located…
4355 Airwest Drive SE
Grand Rapids, Michigan 49512
T 616.871.9889
F 616.871.9879
sales@scarlettinc.com
PRICE $94,900
Used Weinig Unimat Gold 2004
Weinig Unimat Gold 2004 (German Made)
This Unimat Gold Moulder includes the following items:
Used Weinig Unimat Gold
• Cast iron base
• US-Electrics 3 phase, 460 Volts, 60 hertz. 111 Amps
• Spindle diameter 1-1/2 inch
• 6000 RPM for all spindles
• Electronic brakes on all spindles
• Feed speed 20 – 98 FPM
• Inverter controlled 5.5 HP feed motor
• Bottom spindle 10 HP
• Right spindle 10 HP (individual motor)
• Left spindle 10 HP (individual motor)
• Top spindle 15 HP
• Top spindle 20 HP
• Bottom spindle 10 HP
• Receding chip breaker in front of both top spindles
• One powered table roller, steel, between the top spindles
• One powered table roller, steel, in the outfeed table
• Chromed table plates
• Table plates adjustable to tool cutting circle on vertical spindles
• Manual waxilit pump
• Central lubrication points
• Side pressure roller before first bottom spindle
• Pressure rollers from above, spring-mounted
• Lateral pressure roller opposite right spindle, spring-mounted with 2
rollers; connected to left spindle
• Electro-magnetic interlock for enclosure door.
• Operator training on site NOT included, additional charges apply.
PRICE $39,900
4355 Airwest Drive SE
Grand Rapids, Michigan 49512
T 616.871.9889
F 616.871.9879
sales@scarlettinc.com