archive.php

Scarlett Blog

One Simple Way to Save your Business Money in 2015!

Understanding How Section 179 Works…

Section179scarlettinc

Section 179 is a tax code created to help businesses. By allowing businesses to deduct the full amount of the purchase price of equipment (up to certain limits, for 2015 the deduction amount limit is $25,000) Section 179 is a fantastic incentive for businesses to purchase equipment this year.

Most people think the Section 179 deduction is some mysterious or complicated tax code. It really isn’t, as you will see below.

Essentially, Section 179 of the IRS tax code allows businesses to deduct the full purchase price of qualifying equipment and/or software purchased or financed during the tax year. That means that if you buy a piece of qualifying equipment, you can deduct the FULL PURCHASE PRICE from your gross income. It’s an incentive created by the U.S. government to encourage businesses to buy equipment and invest in themselves.

Several years ago, Section 179 was often referred to as the “SUV Tax Loophole” or the “Hummer Deduction” because many businesses have used this tax code to write-off the purchase of qualifying vehicles at the time (like SUV’s and Hummers). 

Section 179 can greatly help your bottom line. By deducting the full cost, you lower the amount you pay for equipment and/or software substantially. And these benefits can be further expanded if you choose to lease or finance your equipment & software.

Section 179 is simple to use. All you need to do is buy the equipment, and use a special IRS form. That’s it. 

There is simply no better time than now to take advantage of Section 179 and Bonus Depreciation. Why? Because it is a Use-It-or-Lose-It write-off that ends December 31st.

The ‘Section 179 Deduction’ Helps Your Business!

179

Dec 19, 2015 –   “The Protecting Americans from Tax Hikes Act of 2015” passed by both the House and Senate and will be signed into law in the next few days – expanding the Section 179 deduction limit to $500,000. Read the summary from the Ways and Means committee here.

Section 179 will be permanent at the $500,000 level. Businesses exceeding a total of $2 million of purchases in qualifying equipment will have the Section 179 deduction phase-out dollar-for-dollar and completely eliminated above $2.5 million. Additionally, the Section 179 cap will be indexed to inflation in $10,000 increments in future years.

50% Bonus Depreciation will be extended through 2019. Businesses of all sizes will be able to depreciate 50 percent of the cost of equipment acquired and put in service during 2015, 2016 and 2017. Then bonus depreciation will phase down to 40 percent in 2018 and 30 percent in 2019.

NEW C.R ONSRUD MODEL F122E24 “5-Axis Extreme Series” CNC ROUTER

NEW C.R ONSRUD MODEL F122E24 “5-Axis Extreme Series” CNC ROUTER

c.r.onsrudf122e24

 

Heavy Duty 5 Axis Machining Center, Thick Fixed Bridge & Vertical Supports, Thermal Heat Treated, Stress Relieved, & Normalized One-Piece, Steel Frame Base; Fixed Bridge, Twin Moving Table Design with 3600″ per minute machining speed, full 3-D capability, precision drives for ALL axes, precision linear guide ways, centralized manual lubrication system, 12 Tool – Automatic Tool Changer with two (2) HSK tool holders included, Twin Aluminum Tables function as independent tables. Twin Tables can also operate in tandem as a single table, with full table coverage. Each table has low vacuum sensing safety shut-off with override capability. Includes all switches, valves, gauges, safety interlocks, & Vacuum Plumbing necessary for either suck-through or dedicated spoil boards, and is easily modified for the use of pod systems. All tables include pressure sensitive safety-stop / emergency-stop bars along the front & rear, & machine is surrounded by a 360 degree emergency-stop cable.

41-inches of Z stroke – Increases 5-Axis Frame under bridge clearance & Z-stroke 41 inches

Two Tables (5’X5′)

(2) 5’×5′ – Aluminum NEMI Vacuum Grid Table – Aluminum NEMI grid table enables the conversion from total flow-through vacuum hold-down to pods, pins, fixtures, etc. with higher accuracy part positioning

FANUC 31i-B5 Machine Controller System With Integrated PC Interface

5-Axis – 24 HP Spindle – Double-Armature, 5-Axis Long Nose Spindle w/ HSK-63F Spindle Taper, fully programmable & reversible, variable speed, quick-change spindle, capable of routing & drilling, programmable feed rates w/override capability. A-Axis Rotation +/- 120 degrees, C-Axis Rotation + 300 / – 115 degrees.

Chiller for Liquid Cooled Spindle – Adds a liquid cooling system & chiller in place of the standard fan & compressed air spindle cooling system.

Automatic Oil Fog Mist Lubricator – Sprays a fine oil mist on the tip of the bit, for cooling purposes

12 Tool – Dynamic Automatic Rotary Tool Changer – Fully Servo controlled. Design eliminates misfires & quickly changes between 12 different tools.

Contact Scarlett for more info…

Used KOMO CNC ROUTER-VR 510TG

Komo VR 510TG CNC Router, 10 stations, 5 ft. x 10 ft. table, 3 phase, 48v, vari-speed 626 MC5 Vector Control w/Dynaseal vac pump, Heviduty 30KVA 3 phase transformer GE Fanuc readout. Equipped with HSD 13.4 HP spindle; HSK 63F, 12 position rotary tool changer; automated tool presetter; boring block with (9) vertical spindles; DNC scheduler with Intelligent Spoilboard Management; GE Fanuc Panel i CNC Control; Komo Production Management Software; Modular Grid Table w/ (4) pin part location; central automatic oil lubrication system; air conditioner for electrical panel; Travini 25HP vacuum pump 380 cfm.

$69,900 THIS MACHINE IS SOLD!

 

call Scarlett Today 616-871-9889 or e-mail us at media@scarlettinc.com

CNC Routers - ScarlettScarlett Inc. Ohio Michigan is specialized in New/Used CNC Routers, 5 axis CNC Routers, Aluminum Fabrication and Aluminum cutting Machine, Used Woodworking Machinery, Solid Wood Manufacturing, Aerospace Product and Parts Manufacturing in Ohio Michigan.Aluminum Fabrication - Scarlett

5 axis CNC Routers and New / Used CNC Routers Ohio Michigan

5 axis CNC RoutersCNC machining centers saves time and provides maximum flexibility for your production needs. We represent only the finest American Engineered CNC products to ensure our customers have the highest performing machines in the industry. The machines are packed up and ready to ship. Price includes loading on a truck. Used CNC RoutersThese machines can be configured in in a large variety of spindle horsepowers and many different style frames and formats. 5 axis CNC Routers and New / Used CNC Routers

Aluminum cutting Machine & Aluminum Fabrication Ohio Michigan

We provide solutions for cutting aluminum with CNC machining centers as well as other machine cutting options. Aluminum cutting MachineGive us a call so that we can evaluate your workflow and engineer a solution to fit your metal cutting operation. Aluminum cutting Machine & Aluminum Fabrication

Used Woodworking Machinery Ohio Michigan

We work with numerous applications from solid wood to panel processing. Used Woodworking MachineryIf you are looking for a space saving, economical, high-quality machine to fit your budget, look no further. Used Woodworking Machinery

Solid Wood Manufacturing Ohio Michigan

We work with numerous applications from solid wood to panel processing. Offers solutions for a wide array of operations from small woodworking shops, to large progressive manufacturing plants. Solid Wood ManufacturingEvery component on our machines is designed and created using the latest technology in precision laser cut and CNC press break machinery and assembled using a simple bolt-together construction without any welds. Solid Wood Manufacturing

Aerospace Product and Parts Manufacturing Ohio Michigan

Advanced materials outperform conventional materials with superior properties such as toughness, hardness, durability and elasticity. Aerospace Product and Parts Manufacturing Ohio MichiganThey can have novel properties including the ability to memorize shape or sense changes in the environment and respond. Aerospace Product and Parts Manufacturing